pu - 217 a / B

Product introduction

PU-217 Ultra-cost-effective two-component polyurethane adhesive

Product description

PU-217 is a solvent-free, environmentally friendly and cost-effective polyurethane adhesive.

Product characteristics

Neutral and odorless

High bonding strength, adjustable use ratio

Operation time after mixing (25℃)

30-55min

Good adhesion to the substrate

Good resistance to high and low temperatures (-40℃-120℃)

Initial curing time

~ 3 h

Surface sprayable

Final curing time

72 h

application: adhesion composite between ceramic non-slip pavement, beech plastic board, mineral board, stone, plastic board, composite board, etc.

Room temperature curing (the above test data are 25° C room temperature data)

Tensile shear strength

> 6.5Mpa (Wood test data)

Construction method: At room temperature according to the mass ratio of A/B component 6:1 evenly mixed after use.

Note: All data expressed in the product data sheet is obtained in the laboratory test, due to many different construction environments, the actual measured data may be different.

Equipment cleaning: The uncured colloid can be removed from the tool or equipment by ethylene acetate, tena water, acetone, and once cured

It can only be removed mechanically.

Packing: * Component A 25.7kg/ barrel, component B 4.3kg/ barrel

PU-217A

Component A is 1400kg/ barrel and component B is 250kg/ barrel

Application example

For information and recommendations relating to transportation, handling, storage and handling of chemicals, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety related data.