PU202
E-mail:marketing@gzgbs.com
Add:No. 15 Nanxiang Third Road, Science City, Luogang District, Guangzhou City
TEL020-66610777
Parameter
PU - 202 A / B
Product introduction
PU-202 two component polyurethane adhesive
Product description
PU-202 is a solvent-free, environmentally friendly and cost-effective polyurethane adhesive.
Technical parameter
PU - 202 A / B | Component A
| Component B | |
Viscosity pas (25℃) | 25000±2000
| 250
| |
Specific gravity g/cm3
| 1.56 | 1.25 | |
Use ratio
| 100 | 20 | |
Operation time after mixing 25℃) | 30-45min
| ||
Initial curing time | ~ 3 h
| ||
Final curing time | 72h | ||
Room temperature curing (The above test data are 25℃ room) | |||
Tensile shear strength | >5.5 Mpa (wood test data) | ||
Film forming character | Viscoplastic | Light brown | |
Note: All data expressed in the product data sheet is obtained in the laboratory test, due to many different construction environments, the actual measured data may be different.
Product charactics
Neutral odorless, curing speed block
High viscosity, high initial strength
Good adhesion to the substrate
Good resistance to high and low temperatures (-40℃-120℃)
Surface sprayable
Scope of application: adhesion composite between ceramic non-slip pavement, beech plastic board, mineral board, stone, plastic board, composite board, etc.
Construction method: At room temperature according to the mass ratio of A/B components 5:1 evenly mixed after use.
Equipment cleaning: The uncured colloid can be removed from the tool or equipment by vinyl acetate, tena water, acetone, and once cured, it can only be removed by mechanical methods.
Packaging:
Component A is 25kg/ barrel, component B is 5kg/ barrel
Component A is 1400kg/ barrel and component B is 250kg/ barrel
PU-202A
Application example
For information and recommendations relating to transportation, handling, storage and handling of chemicals, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety related data.