ΕΡ-505 A / B

Epoxy adhesive product introduction

Product description

EP-505 is a room temperature curing high strength two-component adhesive.

Application: bonding wood materials, metal materials and non-metal materials such as glass, cement, ceramics, etc.

Construction method: At room temperature according to the mass ratio of A/B components 1:1 uniform

Mix and use. Wool and clean the gluing surface of the bonded parts. For materials with low surface energy, such as PP, PE fluoroplastics, polyester, etc., surface treatment must be performed firstly.

Room temperature curing (the above test data are 25℃ room temperature data)

Tensile shear strength

= 7Mpa (wood test data)

In order to obtain good bonding;

Note: All data expressed in the product data sheet is obtained in the laboratory test, due to many different construction environments, the actual measured data may be different.

Equipment cleaning: The uncured colloid can be wiped with alcohol, toluene, xylene or IPA, acetone, and once cured, it can only be removed by mechanical method.

Loading: A component 1kg/ bottle, B component 1kg/ bottle storage and transportation:

This product shall be sealed and stored in a cool and dry place, and component b shall be sealed and stored away from light for one year;

package

This product is non-flammable and explosive, and can be transported as a general chemical.

Application example

For information and recommendations relating to transportation, handling, storage and handling of chemicals, users should refer to the actual safety data sheet, which includes physical, ecological, toxicological and other safety related data.