1. Anti slip performance

Colored anti slip ceramic road is a road surface layer with a large structural depth and friction coefficient formed by bonding 3-5mm thick colored ceramic particles with a high polishing value (polishing value, which reflects the ability of stone to resist tire polishing) on the existing road surface.

Due to its large structural depth (1.5mm), the texture depth (TD, formerly known as texture depth) of the road surface is an important indicator of road roughness. It refers to the average depth of uneven open pores on a certain area of the road surface. It is mainly used to evaluate the macroscopic roughness, drainage performance, and skid resistance of the road surface, thereby greatly increasing the friction coefficient of the road surface and making it have good anti-skid performance. Due to the depth of construction helping to remove water from the contact point between the wheel and the road surface, allowing the depth of construction to immerse the wheel. When there is water on the road surface, the deeper the depth of the road surface construction, the better the contact point, increasing the friction force between the wheel and the road surface, thereby improving the anti-skid performance.

When asphalt and cement roads are first laid, their anti-skid performance is good, but after a period of use, the depth of their surface structure will decrease, greatly reducing their anti-skid performance. Colored anti slip pavement adhesive is a type of adhesive that adheres ceramic particles to the surface, maintaining strong anti slip performance as long as the ceramic particles are not damaged. The important attribute of ceramic particles is to maintain a high polishing value. When the microstructure is worn, it is not the ceramic particles that are polished, but the entire structure is worn layer by layer. During this process, the construction depth remains unchanged and its performance continues to be maintained. Another important point is that ceramic particles are not in the form of flakes and are mainly irregular in shape. Before using any ceramic particle, it is recommended to measure its polishing value, which generally requires reaching 65 or above.

2. Beautify the environment

Colored anti slip ceramic roads not only improve road performance and functionality, but also make the environment more colorful. They can also use their bright colors to create various patterns to beautify the environment. With the rapid development of cities, people have higher requirements for urban road construction and environmental art. For example, greenways, bicycle lanes, pedestrian crossings, circular roads, park landscape roads, and community roads in big cities such as Beijing, Shanghai, and Guangzhou all use colored anti slip ceramic roads.

3. Traffic Warning

Laying colored anti slip ceramic roads of different colors is an important traffic concept in modern traffic management. Utilizing road resources to reasonably guide traffic and effectively improve traffic safety.

To achieve the above concept, clear and prominent traffic signs are required. The colored anti slip ceramic road is a product that meets the above requirements, using various colored adhesives and ceramic particles to match and create a dazzling and eye-catching logo. The traffic management department can use colored road surfaces as needed to set up various dedicated lanes and signs, which not only have road functions but also serve as traffic warnings. Secondly, colored anti slip ceramic roads increase the anti slip properties of the original road surface, and adding pavement on special road sections can increase the friction of the road surface, which can remind drivers to drive safely, especially when the road surface slips on rainy days, to better ensure driving safety. At present, colored anti slip ceramic roads are commonly used in high-speed road speed bumps, traffic accident prone sections, toll station entrances and exits, ramp sections, tunnel entrances, and parking areas in service areas.

4. Product advantages

Guangzhou Jibisheng Technology Industry Co., Ltd. has been committed to the research and development of special polyurethane adhesive products for many years, and has launched environmentally friendly solvent-free polyurethane adhesives suitable for the paving of colored anti slip ceramic roads. Before paving, apply high-performance solvent-free polyurethane adhesive evenly to the road surface and sprinkle wear-resistant colored ceramic particles. After curing, it can enhance the road surface's resistance to rutting, prevent road cracking, and extend its service life. Reduce splashing on rainy days, shorten braking distance by more than 40%, and reduce slipping by 70%. The thickness of the pavement is thin, the weight is light, and it will not increase the bearing capacity of the bridge and pavement foundation. Excellent thermal aging performance, good high-temperature stability, good low-temperature resistance, low low-temperature brittleness, suitable for use in cold regions. The product does not contain solvents and has no odor. It is an environmentally friendly material that will not have adverse effects on the human body.

2、 Road construction steps

1. Cleaning and drying: Remove dust, gravel, and other debris from the construction area, and dry or blow dry the road surface with water.

2. Marking: Use tape or other materials to mark the construction scope.

3. Adhesive coating: Mix components A and B evenly and apply them to the road surface.

4. Laying: Spread colored ceramic particles evenly on the coated adhesive.

5. Recovery: After confirming that the resin has hardened (approximately four hours from the completion of laying), the colored ceramic particles that have not adhered to the adhesive will be recovered.

3、 Scope of physical performance indicators for Jibisheng color anti slip pavement adhesive products

project

Cailubao CR351

Mixed viscosity (cps/25 ℃)

9000 ± 2000

Applicable period (25 ℃, 100g)

40 ± 10min

Dry time/open traffic time (25 ℃)

3-4 hours

Preliminary curing time (25 ℃)

~3h

Basic curing time (25 ℃)

24-hour

Tensile shear strength (MPa, beech wood)

≥ 6 MPa

Water resistance

Soak in water for 24 hours without any abnormalities

Alkali resistance

Soak in saturated calcium hydroxide solution for 24 hours without any abnormal phenomenon

Acid resistance

Soak in 1% sulfuric acid solution for 24 hours without any abnormal phenomenon

4、 Product ratio and packaging: A: B=5:1 Packaging: 25 KG/5 KG plastic drums.

5、 Storage and transportation:

Store in a cool and ventilated place with a shelf life of 12 months. Non hazardous chemicals can be transported as general chemicals.

Note: The above data is for reference only. Please make sure to test the relevant performance or call Jibisheng Laboratory before use.